COLOR DOME CAMERA
User’s Manual
32
COLOR DOME CAMERA
User’s Manual
33
Specifications
※
The specification for this product may change without prior notice for product improvement.
SIR-4260VN
SIR-4260VP
ELECTRICAL
Input Voltage
DC 12V / AC 24V
Power Consumption
Max 5W (LED ON)
VIDEO
Imaging Device
1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels
811(H) x 508(V)
795(H) x 596(V)
Effective Pixels
768(H) x 494(V)
752(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal /Line-Lock
Frequency
H : 15.734KHz V:59.54Hz
H: 15.625KHz V: 50.00Hz
Horizontal Resolution
COLOR : 600TVL, B/W : 700TVL
Min. Illumination
LED ON : 0Lux / LED OFF : 0.15Lux(Color, F1.2), 0.0003Lux(Color,SENS-UP x512)
Visibility distance(IR LED)
30m(10EA)
S/N (Y Signal)
52dB (Weight On, AGC Off)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio
3.6x (Manual)
Focus Length
2.8 ~ 10.0mm (F1.2)
Angular Field of View
H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
PAN / TILT / ROTATE
Pan / Tilt / Rotate Range
0
°
~ 340
°
/ 0
°
~ 146
°
/ 0
°
~ 340
°
OPERATIONAL
Electronic Shutter Speed
ESC, Fixed, A.FLK, Manual (1/60~1/120k) ESC, Fixed, A.FLK, Manual (1/50~1/120k)
On Screen Display
NTSC : Korean,English,Japanese,Spanish,French,Portuguese
PAL : English,French,German,Spanish,Italian,Chinese,Russian,Polish,Czech
SSDR
On / Off (Level adjustable)
Backlight Compensation
BLC / HLC / OFF
Day & Night
COLOR / B/W / AUTO (ICR)
Gain Control
Low / High / Off
White Balance
ATW /Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration)
Auto /Off (Selectable x2 ~ x512)
Motion Detection
On / Off (8 Programmable zones)
Privacy Masking
On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII)
On / Off (Level adjustable)
Digital Zoom
On / Off (x1 ~ x16)
Digital Image Stabilization(DIS)
On / Off
Camera Title
On / Off (Displayed 15 Characters)
Sharpness
On / Off (Level adjustable)
Flip / Mirror
On / Off
Communication
Coaxial, RS-485
Protocol
Coaxial(Pelco), RS-485(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH,
HONEYWELL, SEC)
ENVIRONMENTAL
Operating Temperature / Humidity
-10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Water Resistance
IP66
Dimension (Weight)
Ø148 x 126mm (1.3Kg)
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
• Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are
fixed properly.
▶
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• The image on the screen is dim.
▶
Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to proper condition.
▶
If the camera is exposed to too strong light, change the camera position.
• The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75
Ω
/ Hi-z properly.
• The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
• The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
• The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
• Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu .
• The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
• When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.
