3-19
Samsung Electronics
Installation
Receive Terminal Identification
-This feature
allows the machine to automatically print the
receive terminal ID (if registered), page number,
reduction rate, and the date and time of the
reception at the bottom of each page of a received
document.
Press 1 to turn this feature on.
Press 2 to turn this feature off.
Print Priority Term
-This option is available only
when you install an optional MFP board into your
machine. When you want to print a PC document
while the machine prints a received fax on the
recording paper, you can interrupt the printing and
print the PC document. Press the
PRINT PRIORITY
button to enable the feature. The LCD displays
PP
on the lower line, right corner. The interrupted fax
data will be stored in memory. To disable, press the
PRINT PRIORITY
button again.
PP
on the LCD
disappears.
You can set your machine to turn the feature off
automatically if there is no further data printed
within 30 minutes or 8 hours after PC printing.
Press 1 to select 8 hours. The machine turns off
automatically 8 hours after PC printing is
completed.
Press 2 to select 30 minutes. The machine turns off
automatically 30 minutes after PC printing is
completed.
3-14-3 Confiming System Data Settings
Confirm the system data settings by printing out a
system data list.
1. If not in the tech mode, press
MENU, #, 1, 9, 3, 4
in
sequence to initiate the tech mode.
2. Press
MENU
.
3. Press one of the one-touch PRINT keys 16-20. The
LCD displays the lists you can print out.
4. Press
or
¹
until you find '
SYSTEM DATA
LIST
'.
5. Press
ENTER
. The machine prints the system
data list.
The system data list printed in the tech mode
contains the system data set in the tech mode as
well as in the user mode. The model number and
software version will be printed at the bottom of
the system data list.
