Samsung SF-830, Руководство по обслуживанию

Страница: 49 / 189

Troubleshooting
4-16
Samsung Electronics
Background 1. High voltage output is normal?
2. C/R of Toner cartridge is contaminated? 1. Adjust to the rated status.
2. Replace Toner cartridge.
Ghost 1. High voltage output.
2. Pre-Transfer Lamp.
3. Bad high voltage contact. 1. Check every high voltage.
2. Check the turn-on PTL, LED crash.
3. Clean the inside machine or replace toner
cartridge.
Stains on back of paper 1. Contamination of transfer roller.
2. Stains of paper path.
3. Pressure roller’s contamination.
1. Clean the transfer roller with vaccum
cleaner.
2. Clean the area of paper path with cloth or air
cleaner.
3. Remove fuser and replace it.
Poor Fusing 1. Use recommended paper?
2. Check fusing temperature.
3. The machine was under the low tempera
ture for a long time?
1. Should use recommended paper.
2. Check engine controller board.
If you have not thermometer, measure the
thermistor voltage to CPU, If 2.3V±5% in
printing CPU works well. Then, disassemble
fuser and check the thermistor contact and
thermistor.
3. Re-check after putting the machine in the
warm place for certain period.
Partial blank image
(not periodic) 1. Toner is low?
2. The toner cartridge is out of position? 1. Replace Toner cartridge.
2. Checkand adjust.
Partial blank image
(periodic) 1. Develope roller scar or particle.
2. Scar or particle. (94 mm)
3. Transfer roller scar or particle .
(47 mm) 1~2. Replace toner cartridge.
3. Replace transfer roller.
Error Status Check Solution
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer