Samsung SCX-82x0 series, Руководство по обслуживанию

Страница: 233 / 399

4.Servic
4 6 4 4.6.4. Port
This function enables/disables remote connections to
SMB(samba) protocol.
This function can be used when there is a problem t
when there is a need for developers to upload applic
• Service Functions > Port
4.6.5. Capture Log
• Service Functions > Capture Log
Since enabling those ports can creates a risk of dam
administrator of the customer site is necessary. The
enable/disable the services.
• Service Functions > Capture Log
This function copies all the saved log in the system t
a USB memory needs to be plugged into the system
1GB. If the system log size become considerably hug
memory.
4 6 6 S
4 6 7 Count Setting of Large Pa
4.6.6. Toner Save
This function reduces the use of toner up to 30% and
• Service Functions > Toner Save
4.6.7. Count Setting of Large Pa
• Service Functions > Count Setting of Large P
This function sets count of large page, such as A3 a
count. For example, the total use of 100 A4 impress
impressions if the configuration is set to “1 Count Up
configuration is set to “2 Count Up”.
4.6.8. System Recovery
• Service Functions > System Recovery
This function repairs or format the HDD of the syste
saved in a USB memory and that USB memory need saved in a USB memory, and that USB memory need
From the system recovery UI, Choose “SYS” to reco
to recover all the partition of the HDD.
When the system recovery UI is appeared after rebo
data in the selected partition or choose “HDD Forma
The password of this mode is 1934.
Service Manual
4-4
ce Mode
o the system via telnet, OSGI command shell, and
hat requires developers to access the system or
cations for a test.
aging data stored in the device, agreement of the
user must log in as the administrator to
to a UBS memory as a zip file. To use this function,
m. Note that the size of system log could reach up to
ge, it will take longer time to copy to the plugged
age
d only applies to monochrome printing.
age
Page
nd ledger size, to 1 count or 2 count of the total
sions and 100 A3 impressions will become 200
p” while the total will be 300 impression if the
em. To use this function, a HDD image need to be
ds to be plugged in the system before the execution ds to be plugged in the system before the execution.
over only the system partition of the HDD or “ALL”
oot, choose “HDD Repair” to repair any corrupted
at” to format the data in the selected partition.
SAMSUNG ELECTRONICS
42