Changing Your Settings
92
Setting a Phone Password
9.
Tap the
Version Info
tab to view the R2VS software version information.
Setting a Phone Password
For more information, refer to
"Locking Your i760"
on page 24. The password
option allows you to enable or disable a password. The available settings are:
•
Simple PIN
: This password must be at least four characters in length and can not
contain a simple sequence such as: 000, 1111, or 1234.
•
Strong alphanumeric
: This password must be at least seven characters in length
and contain at least three of the following: uppercase/lowercase letters, numerals,
and punctuation.
When a password is configured, there is a “prompt if device unused” option that
allows a length of time range from 0 minutes - 24 hours. When this option is set, you
can continue to use the i760 until the screen turns off due to inactivity. If the device
is inactive for a greater amount of time than specified in this setting, a password
must be entered when you turn the device back on.
To set the password:
1.
From the
Today
screen, tap
Start
(
) located in the upper left corner of
the screen.
2.
Tap
Settings
(
).
3.
Tap the
Personal
tab.
4.
Tap
Lock
(
).
5.
Tap the check box next to
Prompt if device unused for
.
6.
Tap the
Minutes
drop down menu and select the amount of unused time
required before you are prompted for a password if the phone becomes
idle.
7.
Tap the
Password type
box and select either
Simple PIN
or
Strong
alphanumeric
.
8.
Tap the
Password
box and use either your QWERTY keypad or keypad to
enter the password you want. Re-enter the password in the
Confirm
box.
9.
Tap
, then tap
Yes
to confirm.
ok
