English _
11
INSTALLING THE BUTTON TYPE BATTERY
Installing the button type battery (CR2025) in the remote control
1.
Turn the battery holder counterclockwise (as indicated with (
) mark) using your
fingernail or a coin to open it. The battery holder opens.
2.
Insert the battery into the battery holder with the positive (+) terminal facing down and
press it firmly until you hear a locking sound.
3.
Place the battery holder back in the remote control, match its (
) mark with the (
)
mark on the remote control, and turn the battery holder clockwise to lock it.
Precautions regarding the button type battery
• There is a danger of explosion if the button type battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Do not pick up the battery using tweezers or other metal tools. This will cause a short
circuit.
• Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk
of explosion.
WARNING
Keep the button type battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
USING THE CRADLE
• The cradle is a connection plate which can be used to make the camcorder more stable when charging the
battery, or connecting to an external device (TV, PC, etc.).
• You have to connect the AC power adaptor to the cradle when
connecting external devices using the cradle.
• If you connect your HD camcorder to the provided cradle using more than
one type of output cable, the order of priority of the output signal is as
follows:
USB cable
HDMI cable
Component/Multi-AV cable.
• If you connect the camcorder to the cradle, the connection jack on the
camcorder itself (USB and Component/Multi-AV jacks) will not output a
signal.
• Do not connect the connection cables to HD camcorder and cradle at the
same time, it may cause conflict and may not work properly. If this occurs,
remove all the connected cables and try the connection again.
Battery
holder
1
2
3
DC IN jack
USB jack
HDMI jack
Cradle
receptacle
Component / Multi-AV jack
