72
_ English
Recording with a DV Connection Cable
1.
Press the
MODE
button to set
Player
(
).
2.
Connect the DV cable (not supplied) from the
DV jack of the camcorder to the DV jack of the
other DV device.
Make sure that (
) is displayed.
3.
Press the
Recording start/stop
button to
begin REC PAUSE mode.
"PAUSE"
is displayed.
4.
Start playback on the other DV device while
you monitor the picture.
5.
Press the
Recording start/stop
button to start
recording.
If you want to pause recording momentarily,
press the
Recording start/stop
button
again.
6.
To stop recording, move the
Joystick
down
(
T
)
.
When you transmit data from the camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
Do not use another DV device when using IEEE1394.
The IEEE1394 cable (DV cable) is sold separately.
Moving image software is commercially available.
Most DV enabled PCs have a 6 pin jack. In this case, a 6pin/4pin cable is required for the connection.
Most DV enabled notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.
DIS and C.Nite features are not available when in DV (IEEE1394) mode.
If DV (IEEE1394) mode is set, DIS and C.Nite modes will be released.
Search (Forward/Reverse) (camera mode) is not available when in DV (IEEE1394) mode.
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however
recorded pictures will not be affected.
•
•
•
•
•
•
•
•
•
•
•
•
MODE
AV
DV
POWER
CHG
VO
L
PC
IEEE1394 cable
(DV cable)
Camcorder
DV Jack
