English - 21
Setting up the TV with your PC
Preset: Press the
N
SOURCE
button to select
PC
mode.
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of ine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
N
Press the
T
TOOLS
button to display
Tools
menu.
You can also set the auto adjustment by selecting
Tools → Auto Adjustment
.
Screen
❑
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Adjust the PC’s screen positioning if it does not it the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Picture Reset
→
❑
Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Colour
: 55
Tint (G/R)
: G50/R50
Auto Adjustment
►
Screen
Advanced Settings
Picture Options
Picture Reset
Pi
ct
u
re
Pi
ct
u
re
Advanced Settings
Picture Options
Picture Reset
►
Pi
ct
u
re
2009-05-20 4:54:45