Samsung Pro 815, Руководство по обслуживанию

Страница: 68 / 105

73
Ⅵ. TROUBLESHOOTING
1. POWER ON DEFECT
Check the power
(Battery, Adaptor, etc.)
If the consumption of
current is 0mA
1. Check the connections between the each PCB.
(TOP FPCB-TOP PCB-MAIN, POWER-MAIN)
2. Check the connection of battery L/W.
3. Check the condition of F1 (FUSE). If the both terminals are
between 0~0.03 Ω , it has no problem.
4. Check the condition of Q5.
1. Check the connection of JOG FPCB and Main PCB.
2. Check the Card Door and Card Door S/W.
3. Check the assembling condition of CCD FPCB and MAIN PCB.
1. Check the assembling condition of Main PCB and Card FPCB.
2. Check the condition of Q1 in the Main PCB.
→ When an incorrect CF CARD is inserted, Q1 may be
damaged. It causes camera malfuction.
If the comsumption of current
comes down from 200 to 0mA.
After inserting the CF CARD,
the camera can't operate.
Main parts of the Power PCB
R42, L4, L5, L6, L9, L11, L13....
Update the camera with the FULL VERSION FIRMWARE.
Check the condition of the Power
PCB (Short, Breakage, etc.)
Change the Power PCB
and Main PCB
If the consumption of current
is between 200 ~ 300mA