Samsung POWERbot SR1 M70 Series, Руководство пользователя

Страница: 7 / 212

ENGLISH- 07
CAUTION
Before use
f
Insert the dustbin before using
POWERbot.
f Be careful with the followings for proper
automatic recharging.
– Always turn on the power of the docking
station.
– Install the docking station where
POWERbot can easily find.
– Do not leave any object in front of the
docking station.
f When installing the docking station, do
not leave the cord carelessly on the floor
since POWERbot may get tangled by it.
f
Do not use POWERbot on black colored
floors.
– The POWERbot may not be able to operate
normally.
f
Do not place any objects within 0.5 m
to both sides and 1 m to the front of the
docking station.
f Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
f
Do not install the docking station in an
area with a dark floor.
– If the floor around the docking station is
dark, recharging is hindered.
f
Move any obstacles that may disturb
POWERbot's movement (such as
children's indoor swing or slides) before
cleaning.
f
Do not use the POWERbot in a place
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
f
If a brush or brush cover is not
assembled correctly, scratches may occur
on the floor, or product malfunction may
occur.
f
Before operating the POWERbot, remove
the objects which could break such as
a frame, mirror, and porcelain items
so that the POWERbot works without
interruption.
CAUTION
In use
f
Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
– The POWERbot cannot pass over carpet
that is thicker than 1 cm.
f Do not use POWERbot on tables or other
high surfaces.
– There is a risk of damage if it falls.
f The POWERbot may bump into chair,
desk legs therefore move them away for
faster and efficient cleaning.
f
When POWERbot is operating, do not lift
it up or carry it to another area.
f
Do not hold by driving wheels of
POWERbot when carrying it to another
area.
f
Do not put any objects on top of
POWERbot and camera since it may
cause malfunction.
f
Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
f Do not aim the red pointer directly at
people or animals.
f
Do not lie down around the POWERBOT
that is running.
– Your hair may be caught in the brush,
resulting in physical injury.
CAUTION
Cleaning and
maintenance
f Prevent any damage to POWERbot by
complying with the following
– Do not clean POWERbot by spraying water
directly onto it or use benzene, thinner,
acetone or alcohol to clean it.
f Do not disassemble or repair POWERbot.
This should only be done by a certified
repairman.
f
Always keep the obstacle sensor, cliff
sensor and camera clean.
– If foreign matter accumulates, sensors may
malfunction.
1_VR7000_EN_DJ68-00763G-08_SB.indd 7 2017-12-19 오후 5:04:19