Samsung POWERbot SR1 M70 Series, Руководство пользователя

Страница: 33 / 212

ENGLISH- 33
Information codes
<SR1*M701*** series>
1
The three
indicators below
blink and an
information codes
alarm sounds.
2
Turn off the
emergency switch
and check the below
instructions and
take appropriate
action
3
Information code
will disappear
when you turn on
the emergency
switch
Information codes
Information codes animation
Information codes Checklist
The POWERbot is caught, stuck or trapped while moving
around.
f
Turn off the emergency switch and move the POWERbot to
another area.
Foreign matter caught in the brush.
f
Turn off the emergency switch and remove the foreign matter
from the brush.
Foreign matter caught in the left Driving wheel.
f Turn off the emergency switch and remove the foreign matter
from the Driving wheel.
Foreign matter caught in the right Driving wheel.
f Turn off the emergency switch and remove the foreign matter
from the Driving wheel.
Bumper sensor needs to be checked.
f Turn off the emergency switch and turn it back on.
f
When information code does not disappear, check if there's any
small foreign matter between the bumper and the main body. If
there is, pull the bumper slightly and remove the foreign matter.
Foreign matter accumulated on the obstacle sensor.
f
Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
Foreign matter accumulated on the cliff sensor.
f
Turn off the emergency switch and clean the cliff sensor with a
soft cloth.
Main PCB needs to be checked.
f Turn off and restart the product. If the same problem occurs
repeatedly, a service check is required.
1_VR7000_EN_DJ68-00763G-08_SB.indd 33 2017-12-19 오후 5:05:06