Samsung PL-H403W, Инструкция по эксплуатации

Страница: 37 / 60

35
Setting Up the Remote to Operate Your Cable Box
1
Turn off your cable box.
2
Press the SET button on your TV’s
remote control.
3
Press the CABLE button on your TV’s
remote control.
4
Using the number buttons on your
remote control, enter both digits of
the cable box code listed on page
36 of this manual for your brand of
cable box. Make sure you enter both
digits of the code, even if the first
digit is a “0.” If there is more than
one code listed, try the first one.
5
Press the POWER button on the
remote control. Your cable box
should turn on if your remote is set up
correctly.
If your cable box does not turn on
after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed
for your brand of cable box. If no
other codes are listed, try each code,
00 through 35.
Notes on Using Remote Control Modes: VCR, Cable and TV
• When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
• When your remote is in “TV” mode, the VCR control buttons (PLAY, PAUSE, etc.) still operate your VCR.
• When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume, and the
VCR control buttons (PLAY, PAUSE, etc.) still operate your VCR.
1 2 3
4 5 6
8
0
SWAP STILL MENU
PIP CH.SCAN ASPECT
CH
S.STD MTS SURR. P.STD
TV VCR CABLE SET
TV/VIDEO ADD ERASE
STOP PAUSE
PRE-CH
SLEEP
REW PLAY
POWER
VOL
+100
7
DISPLAY
9
MUTE
FF
REC
VOL
LOCATE P.SIZE
PIP CH
SET
NUMBER
BUTTONS
POWER
CABLE
PLH403W(eng)SEM 05/12/27 4:12 PM Page 35