Samsung OfficeServ 7030, Руководство по установке

Страница: 96 / 105

OfficeServ 7030 Installation Manual
7.3 Numbering Extensions and C.O. Lines
Once the OfficeServ 7030 system is booted, the base board verifies the boards mounted on
each slot and saves this information as the default configuration of the system.
The C.O. line numbers from 701 are sequentially assigned to the C.O. line board mounted
on Slot 4 of the basic cabinet, and the subsequent numbers are respectively assigned to the
expansion cabinet. This numbering process continues until the C.O. line numbers are
assigned to all C.O. lines
The extension numbers from 201 are sequentially assigned to the extension board mounted
on Slot 1 of the basic cabinet, and the subsequent numbers are respectively assigned to the
next extension board of the next slot. This numbering process continues until the extension
numbers are assigned to all extensions. However, only the numbers from 201 to 349 are
assigned when using 3 digits.
By default, the first port of the first 4DM board is assigned to the attendant group. All C.O.
lines will ring this attendant extension unless the default value is changed. Thus, a phone
with an LCD panel should be connected to the last port of the first 4DM board.
The numbers between 500~549 are assigned to an extension group.
The numbers of C.O. lines, extensions, or extension groups can be changed using the
MMC 724 program.
© SAMSUNG Electronics Co., Ltd. 3