Samsung OfficeServ 7030, Руководство по установке

Страница: 31 / 105

OfficeServ 7030 Installation Manual
1.2 Grounding Conditions
The following measures should be taken when grounding the OfficeServ 7030 system:

The grounding wire of the OfficeServ 7030 system should be grounded to the earth
using a proper material.
 The flow electric current between the power outlet’s grounding wire and the system’s
metal surface should be satisfactory.

Any additional equipment’s grounding should be connected to the system’s grounding
through a single connection point.
Cautions for grounding
- Do not connect the OfficeServ 7030 system's grounding wire to the building's
power conduit.
- The power and grounding installation should comply with the local standard; all
related works should be conducted according to the local standard.
- External grounding is required to prevent bodily injuries or system damages
from lightning, static electricity or voltage surge.
- Unplug the AC power cord before connecting the ground cable. Failure to do so
may cause bodily injury.
- The OfficeServ 7030 system should be connected to a protective-ground outlet.
- The GND in the back panel of the OfficeServ 7030 system should be grounded.
1.3 Power Conditions
The Power Supply Unit (PSU) of the OfficeServ 7030 system receives an AC input power
and supplies an output power of -54 V, +5 V, and +12 V to the system cabinet.
The power condition is as follows:
Table 1.1 Power Condition
Power Supply Standards
PSU Input Power AC 200~240 V
© SAMSUNG Electronics Co., Ltd. 3