Samsung OfficeServ 7030, Руководство по установке

Страница: 45 / 105

CHAPTER 2. Mounting and Replacing the Boards
Setting switches on base board
The base board is equipped with switches relative to the user requirements and system
configuration. To set the switches and mount the boards, proceed as follows:
Set the base board's S1 switch from SW5 to SW8 to Off. SW1 to SW4 are set depending on
the user’s purpose.
Figure 2.7 Setting the Base Board Switches
Table 2.2 Base Board Switches
Switch Description
S1 SW1~SW4 The pins set the system's country code.
SW5 Reserved for future use
SW6 IP address Setting
- On : Default factory setting address
- Off : User setting address
SW7~SW8 Reserved for future use
6 © SAMSUNG Electronics Co., Ltd.
S1
OFF
ON