background image

124

125

Chapter 5 

Appendix

When using IEEE 802.11a wireless LAN, this product is restricted to 

indoor use due to its operation in the 5.15- to 5.25-GHz frequency 

range. Industry Canada requires this product to be used indoors 

for the frequency range of 5.15 GHz to 5.25 GHz to reduce the 

potential for harmful interference to co-channel mobile satellite 

systems. High power radar is allocated as the primary user of the 

5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations 

can cause interference with and/or damage to this device.
The maximum allowed antenna gain for use with this device 

is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 

5.35 and 5.725 to 5.85 GHz frequency range in point-to-point 

operation.
The power output of the wireless device (or devices), which may 

be embedded in your notebook, is well below the RF exposure 

limits as set by Industry Canada.
Operation of this device is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including 

interference that may cause undesired operation of the device.

To prevent radio interference to licensed service, this device 

is intended to be operated indoors and away from windows 

to provide maximum shielding. Equipment (or its transmit 

antenna) that is installed outdoors is subject to licensing.

Wireless devices are not user serviceable. Do not modify 

them in any way. Modification to a wireless device will void 

the authorization to use it. Contact manufacturer for service.

(Si l’appareil est équipé d’une bande 2,4 G ou 5 G)
Des dispositifs de basse puissance, de type radio LAN 

(périphériques de communication sans fil par radiofréquence 

RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peut-

être intégrés dans votre appareil. Cette section est applicable 

uniquement si ces dispositifs sont présents. Consultez l’étiquette 

du système pour vérifiez la présence de dispositifs sans fil.
Les dispositifs sans fil qui peuvent être intégrés dans votre système 

sont uniquement aptes pour une utilisation au Canada si l’étiquette 

du système présente un nombre d’identification d’Industrie 

Canada.
En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne 

peut être utilisé qu’à l’intérieur en raison de son fonctionnement 

dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie 

Canada exige l’utilisation de ce produit à l’intérieur pour une 

plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire 

les éventuelles interférences nuisibles avec les systèmes mobiles 

par satellite du même canal. Le radar de grande puissance est 

considéré comme l’utilisateur principal des bandes de 5,25 à 5,35 

GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer 

des interférences avec ce périphérique et/ou l’endommager.
Le gain d’antenne maximum autorisé avec ce périphérique est 

de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des 

fréquences de 5,25 à 5,35 GHz et de 5,725 à 5,85 GHz dans un 

fonctionnement point à point.
La sortie de puissance du dispositif sans fil (ou des dispositifs) qui 

peut être intégré dans votre système est bien inférieure aux limites 

d’exposition de RF établies par Industrie Canada.

Regulatory Compliance Statements

Содержание NP600B4C
















































































































































Отзывы: