Samsung NP20 Скачать руководство пользователя страница 108

Страница: 108 / 122

Troubleshooting 93

Reinstalling Software

If you have reinstalled the Windows operating system, or the system and program do
not operate properly, you can re-install the driver and program using the system
software CD.

The drivers and programs included in the system software CD are listed in the
D:\ReadMe.htm file. (Provided that the name of CD-ROM drive is "D".)

Running the system software CD

Insert the system software CD into the CD-ROM drive. The initial screen appears
automatically.

Installing drivers

In the initial screen, click

Install drivers

Select the driver you want to install from the device installation screen, and click

Install

How can one install the drivers for operating systems other than
Windows XP?

Install the appropriate driver software included in the system software CD.

Installs device drivers

Installs programs

Содержание NP20



























































































































Результаты поиска

Содержание NP20

Отзывы:

Samsung NP20, Руководство пользователя, Страница: 108 / 122

Результаты поиска

Содержание NP20

Отзывы: