22
3. Disassembly and Reassembly
3-8 Removing Heater-Broil
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may
be present, and you can cut yourself if you are not careful.
Parts
Explanation Photo
Explanation
Broil
1.
Turn off the electrical supply going to the
range.
2.
Open the oven door and remove the racks
from inside the oven.
3.
To remove the broil element.
a)
Remove the Sensor-Thermistor and 5
screws from the front and rear brackets.
b)
Remove Cover-Back Main Wire and
disconnect 2 wires from Heater-Broil
and a wire from Sensor-Thermistor.
* Reassembly of All part is the reverse order of disassembly.
