44
Using "PCoIP"
2
2 Using "PCoIP"
OSD Tab
The
OSD
page allows the screensaver timeout to be set using the
On Screen Display
parameter.
z
The OSD parameters can also be configured using the Administrative Web Interface.
z
The
OSD
page is only available on the client. It is unavailable on the host.
Figure 2-10:
OSD
Configuration
z
Screen-Saver Timeout
Configure the screensaver timeout before the client sets the attached displays into low-power mode.
You can configure the timeout mode in seconds. The maximum timeout value is 9999 seconds. A
setting of 0 seconds disables the screensaver.
Display Tab
The
Display
page lets you enable the
Extended Display Identification Data(EDID)
override mode.
This function is only available through the OSD.
Under normal operation, the
GPU
in the host computer queries a monitor attached to the zero client to
determine the monitor's capabilities. In some situations, a monitor may be connected to a client in a way
that prevents the client from reading the
EDID
information, such as when connecting through certain
KVM
devices. The options in this page configure the client to advertise default
EDID
information to the
GPU
.
Enabling display override forces the default monitor display information to be used which may not be
compatible with the connected monitor resulting in a blank monitor. Only enable display override when
there is no valid EDID information and monitor display characteristics are known.
