58
Using "PCoIP"
2
2 Using "PCoIP"
A maximum of two displays can be enabled at the same time.
z
Alignment
Select how you want displays A and B aligned when they are different sizes.
This setting affects which area of the screen to use when you move the cursor from one display to
the other. The alignment options that appear in the drop-down list depend on whether you have
selected a horizontal or vertical display layout.
z
Primary
Configure which DVI port on the zero client that you want as the primary port.
The display that is connected to the primary port becomes the primary display (i.e., the display that
contains the OSD menus before you initiate a PCoIP session and the display that is requested for
the Windows taskbar after you initiate the session).
Port 1
: Select to configure DVI-1 port on the zero client as the primary port.
Port 2
: Select to configure DVI-2 port on the zero client as the primary port.
z
Position
Specify which display is physically connected to
Port 1
and
Port 2
.
z
Rotation
Configure the rotation of the display in
Port 1
and
Port 2
:
No rotation
90˚ clockwise
180˚ rotation
90˚ counter-clockwise
z
Resolution
The display resolution can be configured for a PCoIP session between a virtual machine or host and
a zero client. The zero client detects the supported display resolutions of the monitor and populates
them to the drop-down menu. By default, the native resolution of the display is used.
z
Revert
Resets the configurations on this page to their last saved settings.
