63
Using "PCoIP"
2
2 Using "PCoIP"
2.4.10
Wake on USB
If you turn off the power after activating
Wake On USB
on the product administrative web page, the
system switches to standby mode.
The
Wake on USB
feature switches the system from standby mode to normal mode if a change to the
keyboard or mouse input is detected.
Changes include clicking a mouse button or pressing a key on the keyboard.
Configuring the settings
1
Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2
Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3
To change the power settings, log in (
Log In
) and select
Permissions
Power
.
4
Configure the settings to suit the environment in which the product is used. (See the image below.)
