background image

11

Before Using the Product

 Before Using the Product

 Caution

Installation and Safety 

 Warning

Do not unplug the power cord when the product is in use.

z

The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied 

by Samsung. 

z

An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed. 

z

If any problem occurs in the product, unplug the power cable to completely 

cut the power to the product. 

Power to the product cannot be completely cut off with the power button. 

Hold the plug when disconnecting the power cord from the power socket. 

z

An electric shock or fire may result.

Do not place candles, insect repellants or cigarettes on top of the product. Do 

not install the product near heat sources.

z

Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a 

bookshelf or wall closet.

z

Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached 

by children.

z

Children may suffocate.

!

!

!

!

Содержание NC241




















































































































Отзывы: