PIM Menu Description (Continued)
1
Access to main menu by pressing the [Menu] button from the normal display.
Then select ‘3. Check’ by pressing the [
], [
] buttons, and press [Set] button.
You can check the status of pulse which is input to each channel.
Pulse Input Status Check
3
Move to the channel you want to check by pressing the [
], [
] buttons,
and then press the [Set] button.
You can select each channel or all channel altogether.
Result :
You can check pulse input status of the selected channel.
- If there is no pulse width limit and high lever signal is input,
the result will be calculated.
4
The result regarding the pulse input of the channel will be displayed.(OK/NG)
NG will be displayed when there is no input within 10 seconds after
selecting the channel.
If the pulse input is normal : Displayed in number
If there is no pulse input : Displayed ‘X’
- CH1, 3, 4, 6, 8 : No pulse input
- CH2, 5, 7 : OK
PIM does not calculate the power consumption during the inspection.
Calculation will start after the inspection and returning to the upper menu.
To check the status of all channels, select ‘All Check OK’ in step 4.
5
After the setting, press the [Menu] button to move to upper menu or
cancel the setting.
All menus will return to the normal display if there is no input for 1 minute.
CH1 Check End
NG
All Check End
X2XX5X7X
Main Menu
3.Check
3.1 Pulse Input
CH1 Check OK
CH1 Check Start
Checking...
Check Menu
2
Select ‘3.1 Pulse Input’ by pressing the [Set] button.
3.Check
3.1 Pulse Input
E-
29
MIM-B16_PIM_IM_E 32320-1.indd 29
2010-05-20 ｿﾀﾈﾄ 7:19:05