E-
27
PIM Menu Description (Continued)
1
Access to main menu by pressing the [Menu] button from the normal display.
Then select ‘2.Configuration’ by pressing the [
], [
] buttons,
and press the [Set] button.
2
Enter the password the [
], [
] buttons and then press the [Set] button.
The default password is ‘0000’.
Existing usage can be reflected by setting the initial value according to the watt-hour
meter which connected to each channel.
Setting the Initial Value of Watt-hour meter (KWh)
3
Select ‘2.6 KWh Set’ by pressing the [
], [
] buttons and then press the [Set] button.
4
Move to the channel you want to set by pressing the [
], [
] buttons,
and then press the [Set] button.
You can select each channel or all channel altogether.
5
Modify the digit by pressing the [
], [
] buttons.
You can move to next digit by pressing the [Set] button.
You can reset the current power consumption by entering the initial value
of the watt-hour meter which connected to the channel.
-Reset power consumption: Entered watt-hour meter value + Wh/Pulse
When resetting the initial value of watt-hour meter, it clears the pulse
and power consumption which input so far. It will calculate the power
consumption based on the changed value.
To set the initial value for all channels, select ‘ALL Channel’ in step 4.
6
Press the [Set] button to save the setting.
7
After the setting, press the [Menu] button to move to upper menu or
cancel the setting.
All menus will return to the normal display if there is no input for 1 minute.
Set Ch1 kWh
CH1:00000.0kWh
Save Settings
CH1:00000.0kWh
E-
27
Main Menu
2.Configuration
Enter your P/W
0:0:0:0
2.Configuration
2.6 kWh Set
2.6 kWh Set
CH1:00000.0kWh
MIM-B16_PIM_IM_E 32320-1.indd 27
2010-05-20 ｿﾀﾈﾄ 7:19:03