manualshive.com logo in svg

Samsung KS8910, Руководство пользователя

Samsung KS8910 - новейший 4K телевизор с изогнутым экраном, предоставляющий впечатляющее качество изображения. Для получения подробной информации и настройки устройства, скачайте бесплатное Руководство Пользователя на manualshive.com. Откройте для себя все возможности этого удивительного телевизора прямо сейчас!

Поделиться
Скачать
background image

A-2

APPENDIX

KS8910 100/10 Mbps ETHERNET TRANSCEIVER

Preliminary Spec. ver

 1.4

address, ff-ff-ff-ff-ff-ff.

•

Bundle - A group of signals which have a common set of characteristics and differ only in their information
content.

•

Capture effect - Under heavy load, if at least one of the contending stations is capable of transmitting back-to-
back packets continuously, that station can capture the network for long periods. This occurs because, once a 
station has succeeded in transmitting, it zeroes its 

attempts

 counter, so its next 

maxBackOff

 will be set to 2. 

Other stations, however, will continue to increment their 

attempts

 counters, causing their 

maxBackOff

 variables 

to grow exponentially. The network still carries traffic at its full rate (except for second-order effects), but its 
arbitration has become unfair. 

•

CCITT - Consultative Committee for International Telephony and Telegraphy. Renamed ITU.

•

Cheapernet - 185-meter-per-segment Ethernet. Also, 10BASE2.

•

CSMA/CD - Carrier Sense Multiple Access with Collision Detection. Used by Ethernet.

•

CDDI - Copper Distributed Data Interface. FDDI without the fiber.

•

CO - Central Office.

•

CRC - Cyclic Redundancy Code. Called Cyclic Redundancy Check in IEEE 802.3 document.

•

DCE - Data Communications Equipment.

•

DS0 - 64-Kbit/s asynchronous rate. One voice channel.

•

DS1 - 1.544 Mbit/s asynchronous rate. 24 DS0 signals. T1 equipment and cable carry DS1 rate and format
between COs.

•

DS2 - 6.312 Mbit/s asynchronous rate. Four DS1 signals.

•

DS3 - 44.736 Mbit/s asynchronous rate. 28 DS1 signals. T3 equipment and cable carry DS3 rate and format
between COs.

•

DMA - Direct Memory Access.

•

Dribble - When the Mac receives a frame that is not an integer number of bytes long. Dribble produces an
alignment error when the CRC is invalid.

•

DTE - Data Terminal Equipment. If the AUI is not exposed, this is the PLS and up. See OSI.

•

EFD - The End of Frame Delimiter <EFD> indicates the end of a transmission. For the MII, deassertion of the
Tx_en signal constitutes an end of frame delimiter.

•

Fast Ethernet group - 100-Mbit/s CSMA/CD Ethernet proposal C.f. 100BASE-VG or AnyLAN. Supported by
approximately 30 companies, including Grand Junction Networks Inc., Sun Microsystems Inc., 3Com corp.,
Cabletron Systems Inc., and Synoptics Communications Inc.

•

FCS - Frame Check Sequence. Also, CRC.

•

FDDI - Fiber Distributed Data Interface. Fiber-optic Data Distribution Interface. 100 Mbit/s.

•

FIFO - First-In, First-Out data buffer. Also, silo or queue.

•

Fragment - A frame that is less than 64 bytes (minFrameSize) long, exclusive of preamble and SFD. Presumed
to be the result of a collision, fragments are discarded and are not reported as an error. Also, runt packet.

•

Frame - A frame is everything in a packet except the preamble and the start frame delimiter: destination and
source addresses, length, LLC data, padding, and frame check sequence.

•

Framing error - See alignment error, dribble.

•

Gateway - A device connecting networks that performs some protocol conversion.

Содержание KS8910




































































































Отзывы:

Нет отзывов

Похожие инструкции для KS8910

Majestic 90 Instructions For Care And Operation preview
90
Бренд: Majestic Страницы: 9
Kathrein HDP 170 Operating Manual preview
HDP 170
Бренд: Kathrein Страницы: 20
dewert okin RF LITELINE Quick Manual preview
RF LITELINE
Бренд: dewert okin Страницы: 3
Samson Concert 77 UM1 Owner'S Manual preview
Concert 77 UM1
Бренд: Samson Страницы: 15
Maas AHT-28-V User Manual preview
AHT-28-V
Бренд: Maas Страницы: 72
Icom IC-F3023T/S Instruction Manual preview
IC-F3023T/S
Бренд: Icom Страницы: 32
Z-Wave ZME U UZB1 User Manual preview
ZME U UZB1
Бренд: Z-Wave Страницы: 2
Omnex GENERIC D160 Installation And Configuration Manual preview
GENERIC D160
Бренд: Omnex Страницы: 16
Evikon PluraSens E2658-O3 User Manual preview
PluraSens E2658-O3
Бренд: Evikon Страницы: 21
Sab Satellite Titan III Combo HD User Manual preview
Titan III Combo HD
Бренд: Sab Satellite Страницы: 43
Vestamatic VRS Switch 1 Installation And Operating Instructions preview
VRS Switch 1
Бренд: Vestamatic Страницы: 2
Dynascan L88 User Manual preview
L88
Бренд: Dynascan Страницы: 10
Elvaco CMeX 50 Quick Manual preview
CMeX 50
Бренд: Elvaco Страницы: 2
Boss Audio Systems MGV520B User Manual preview
MGV520B
Бренд: Boss Audio Systems Страницы: 23
MKS UniMag 971B Operation And Installation Manual preview
UniMag 971B
Бренд: MKS Страницы: 42
Safeguard Supply ERA-PBDCR Owner'S Manual preview
ERA-PBDCR
Бренд: Safeguard Supply Страницы: 2
Transmitter Solutions Stinger 2 390GED21V2 Manual preview
Stinger 2 390GED21V2
Бренд: Transmitter Solutions Страницы: 2
Evikon PluraSens E2648-NH3-S User Manual preview
PluraSens E2648-NH3-S
Бренд: Evikon Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды