manualshive.com logo in svg

Samsung KS8910, Руководство пользователя

Samsung KS8910 - новейший 4K телевизор с изогнутым экраном, предоставляющий впечатляющее качество изображения. Для получения подробной информации и настройки устройства, скачайте бесплатное Руководство Пользователя на manualshive.com. Откройте для себя все возможности этого удивительного телевизора прямо сейчас!

Поделиться
Скачать
background image

Important Notice

The information in this publication has been carefully 
checked and is believed to be accurate at the time of 
publication. Samsung assumes no responsibility, 
however, for possible errors or omissions, or for any 
consequences resulting from the use of the 
information contained herein. 

Samsung reserves the right to make changes to its 
products or product specifications with the intent to 
improve function or design at any time and without 
notice and is not required to update this 
documentation to reflect such changes. 

This publication does not convey to a purchaser of 
semiconductor devices described herein any license 
under the patent rights of Samsung or others. 

Samsung makes no warranty, representation, or 
guarantee regarding the suitability of its products for 
any particular purpose, nor does Samsung assume 
any liability arising out of the application or use of any 
product or circuit and specifically disclaims any and all 
liability, including without limitation any consequential 
or incidental damages.

"Typical" parameters can and do vary in different 
applications. All operating parameters, including 
"Typicals," must be validates for each customer 
application by the customer’s technical experts. 

Samsung products are not designed, intended, or 
authorized for use as components in systems intended 
for surgical implant into the body, for other applications 
intended to support or sustain life, or for any other 
application in which the failure of the Samsung product 
could create a situation where personal injury or death 
may occur. 

Should the Buyer purchase or use a Samsung product 
for any such unintended or unauthorized application, 
the Buyer shall indemnify and hold Samsung and its 
officers, employees, subsidiaries, affiliates, and 
distributors harmless against all claims, costs, 
damages, expenses, and reasonable attorney fees 
arising out of, either directly or indirectly, any claim of 
personal injury of death that may be associated with 
such unintended or unauthorized use, even if such 
claim alleges that Samsung was negligent regarding 
the design or manufacture of said product.

KS8910 100/10 Mbps Ethernet Transceiver User’s Manual

Publication Number: 20-8910-0599
Publication Date: May 1999

 

 1999  Samsung Electronics

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by 
any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung 
Electronics. 

Samsung Electronics Co., Ltd.
San #24, Nongseo-Ri, Kiheung-Eup
Yongin-City, Kyungi-Do, Korea
C.P.O. Box #37, Suwon 449-900

Phone:

82-331-209-3104

Fax:

82-331-209-3109

Internet: http://www.samsungsemi.com

Printed in the Republic of Korea

Samsung Electronic’s microcontroller business has been awarded full ISO-14001 
certification (BVQI Certificate No. 9330). All semiconductor products are designed and 
manufactured in accordance with the highest quality standards and objectives. 

Содержание KS8910




































































































Отзывы:

Нет отзывов

Похожие инструкции для KS8910

Laird CL4790 Hardware Integration Manual preview
CL4790
Бренд: Laird Страницы: 13
Laird AC4490 Hardware Integration Manual preview
AC4490
Бренд: Laird Страницы: 32
Yaesu FT-2400H Manual preview
FT-2400H
Бренд: Yaesu Страницы: 42
Yaesu FTM-3200DR Advance Manual preview
FTM-3200DR
Бренд: Yaesu Страницы: 36
Yaesu FT-8000R Operating Manual preview
FT-8000R
Бренд: Yaesu Страницы: 67
Yaesu FT1DR Technical Supplement preview
FT1DR
Бренд: Yaesu Страницы: 62
M/A-Com MAVM-VMCLL Product Manual preview
MAVM-VMCLL
Бренд: M/A-Com Страницы: 62
Advance Paris X-FTB01 Quick Start preview
X-FTB01
Бренд: Advance Paris Страницы: 2
Yaesu FT-991A Reference Manual preview
FT-991A
Бренд: Yaesu Страницы: 20
Yaesu FR-40R Instruction Manual preview
FR-40R
Бренд: Yaesu Страницы: 17
Steren AVS-610 User Manual preview
AVS-610
Бренд: Steren Страницы: 3
Spotwave Spotcell 167 For Private Trunked Radio Www.Spotwave.Com Quick Installation Manual preview
Spotcell 167
Бренд: Spotwave Страницы: 2
Arcam SOLO MOVIE 2.1 Custom Installation Notes preview
SOLO MOVIE 2.1
Бренд: Arcam Страницы: 17
Xantech Dinky Link 480B-30 Install Manual preview
Dinky Link 480B-30
Бренд: Xantech Страницы: 3
Sagem DVR 6200T User Manual preview
DVR 6200T
Бренд: Sagem Страницы: 52
AERF SRM L Instruction Manual preview
SRM L
Бренд: AERF Страницы: 2
SPC 8150N User Manual preview
8150N
Бренд: SPC Страницы: 28
Zephyr UDPSDR-HF2 User Manual preview
UDPSDR-HF2
Бренд: Zephyr Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды