5
System setup
5
EnG
●
SYSTEM SETUP
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically
recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-
channel sound fi eld optimized for your environment.
ASC SETUP can be made when there is no disc in the unit, or it is in Stop mode with a DVD/CD inserted.
Because the volume level of the tone is fi xed during the ASC setup, you cannot adjust the volume using the
volume control buttons.
If the auto sound microphone is disconnected during the ASC setup, the setup will be cancelled.
When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC ll, and P. BASS sound effects will not work.
To Verify the ASC
Briefl y press
ASC
button.
Distance and level values specifi ed for each channel will appear in the display.
M
`
`
`
`
~
L: F
RONT
S
PEAKER
(L)
R: F
RONT
S
PEAKER
(R)
C: C
ENTRE
S
PEAKER
SW: S
UBWOOFER
SL: R
EAR
S
PEAKER
(SL)
SR: R
EAR
S
PEAKER
(SR)
ASC
Microphone
ASC (Auto Sound Calibration) SETUP
Plug the ASC microphone into the ASC input jack.
Place the ASC microphone at the listening position.
Press
ASC
button.
To create the optimal 5.1 channel sound fi eld, the
selections are in the following sequence:
L
➞
C
➞
r
➞
Sr
➞
SL
➞
SW
When the message "REMOVE MIC" appears in the display,
unplug the ASC microphone.
Setting the ASC function takes about 3 minutes.
To cancel the ASC (Auto Sound Calibration) setup, press ASC
button.
The tone output stops, "CANCEL ASC" appears in the display, and the setup is cancelled.
To listen in the ASC (Auto Sound Calibration) mode, briefl y press
ASC button.
The selection alternates between ASC ON and ASC OFF in the display.
If you select "ASC ON", you will hear sound in the ASC mode.
If you select "ASC OFF", you will hear sound in the mode set in the audio setting of the setup screen.
1.
.
.
~
4.
M
`
