17
- English
Settings
Support
Software Upgrade
For more information about this function see page
18.
Contact Samsung
Provides contact information for assistance with
your product.
Terms of Service Agreement
View the general disclaimer regarding third party
contents and services.
Reset
Reverts all settings to their defaults except for the
network. Requires that you enter your security PIN.
The default security PIN is 0000.
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
cinema's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure that
follows.
•
Before you begin, confirm that the product is
connected to your router with a network cable.
Ğ
Ğ
Automatic
To start the configuration process, follow these steps:
1.
In the Home menu, select
Settings
, and then
press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
Wired Network Settings
, and then press
the
v
button.
The
Wired Network Settings
screen appears.
4.
Press the
+
button on the
Internet Protocol
Setup
menu.
Use
$%
button to select
Auto
, and then press
the
v
button.
Settings
Pic
So
Network
System
Language
Security
General
Support
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Wired Network Settings
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway :
DNS
: Auto
DNS Server
:
>
Move
"
Select
'
Return
5.
The Network function acquires and fills in the
values for
IP Address
,
Subnet Mask
, etc.,
automatically.
6.
After the Network function has acquired the
network values, press the
RETURN
button.
7.
Select
Network Test
, and then press
v
. The
home cinema validates the network connection.
When it is done, press the
RETURN
button.
Ğ
Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the Network
Settings values manually. You can get the Network
Settings from your Internet Service Provider (ISP).
Settings
Picplay
Soundio
Network
System
Language
Security
General
Support
0
0
0
0
255 255 255 0
0
0
0
0
0
0
0
0
Wired Network Settings
Internet Protocol Setup
: Manual
IP Address
:
Subnet Mask
:
Gateway :
DNS
: Manual
DNS Server
:
>
Move
"
Select
'
Return
1.
Follow the first four steps in the Automatic
procedure, but select
Manual
instead of Auto in
Step 4.
HT-J4500_EN-ENG_0206.indd 17
2015/2/6 10:50:59
