64
•
Smart alert
: Once enabled, pickup the device to be alerted and
notified of you have missed any calls or messages.
•
Double tap to top
: Once enabled, double tap the top of the
device to be taken to the top of the current on-screen list.
•
Tilt to zoom
: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold two
points on the display then tilt the device back and forth to zoom in
or out. Access the Advanced settings to change its sensitivity
setting.
•
Pan to move icon
: Once enabled, touch and hold a desired
application shortcut icon or widget on the screen. Once it
detaches, move the device left or right to migrate it to a new
location. Access the Advanced settings to change its sensitivity
setting.
•
Pan to browse images
Once enabled, touch and hold a desired
on-screen image to pan around it. Move the device left or right to
pan vertically or up and down to pan horizontally around the large
on-screen image. Access the Advanced settings to change its
sensitivity setting.
•
Shake to update
: Once enabled, shake your device to rescan for
Bluetooth devices, rescan for Wi-Fi devices, Refresh a Web page,
etc..
•
Turn over to mute/pause
: Once enabled, mute incoming calls
and any playing sounds by turning the device display down on a
surface.
•
Advanced settings
: provides access to advanced gesture
settings such as:
• Quick glance
: allows you to set which features are displayed at
a glance when a user reaches for the device. Choose from:
Missed call, New message, Battery, Current music, or Status
bar.
• Gyroscope calibration
: Allows you to properly calibrate your
device for use with motion gestures.
• Sensitivity settings
: When any of the following features are
enabled, you can then adjust their sensitivity.
Choose from: Tilt to zoom, Pan to move icon, and Pan to
browse images.
Note:
Sensitivity settings are only accessible if the gesture is
currently active.