222
To disconnect your device from the hub:
1.
Access your device’s
AllShare Cast
screen and locate
the current connection.
2.
Tap the entry and select
End connection
.
To reconnect your device again to an existing hub:
1.
Locate the AllShare Hub (dongle) name displayed at the
bottom of the TV (showing the tutorial).
Ex: Name:
Dongle - XXXXXX
.
Important!
Verify the LED is not a solid blue. This indicates
there is another device currently connected.
2.
Access your device’s
AllShare Cast
screen and tap the
same hub/dongle name in the list.
3.
Confirm the connection by making sure both your TV
and device show the same image/screen.
AllShare Cast Hub - Troubleshooting
Connections
•
If this is the first time you are connecting your device to a hub
and the connection fails:
•
Press the
RESET
button for 1 second until it turns solid
BLUE
.
•
Quickly tap the dongle name from within your device’s AllShare
cast screen.
Note:
This process is similar to initially pairing a Bluetooth
device.
•
If you have already successfully paired another device and you
are trying to connect another device:
•
Only one device can be paired and in use at a time with the
hub.
•
From the previously connected device’s AllShare Cast screen,
tap the connection and select
End connection
.
•
If you can’t find the previous device:
–
Press and hold the
RESET
button (on the back of the hub),
for about FOUR seconds until the LED begins to blink
RED
.
–
Access your new device’s AllShare Cast screen and rescan for
the existing hub/dongle.
