102
If You Want to Rerun Setup
Screen Menu >
System
>
Setup
You should do Setup again at home although you did in shop.Before Setup starts, the PIN input screen
displays. The default PIN is “0-0-0-0”.
If You Want to Reset This Feature...
Select
System
-
Setup
(Initial Setup).
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN
number, use the Change PIN function. You should do Setup (Menu → System) again at home although
you did in shop.
"
If you forget the PIN code, press the standard remote control buttons in the following sequence in Standby
mode, which resets the PIN to “0-0-0-0”: MUTE M → 8 → 2 → 4 → POWER (on).
"
If you use Smart Touch Control, please press MUTE → +(Volume up) → RETURN → -(Volume down) →
RETURN → +(Volume up) → RETURN in TV On model.
If You Want to Turn the Store Demo Mode On or Off
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power
is on. The Function menu screen appears. Push the Controller to the left (to MENU (
m
)) and hold
for more than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function
menu using the Controller, push the Controller to the right (to Source (
s
)) and hold for more than 5
seconds.
