11
Operation
Using the Check button
Confirming the cooking time and Power Level in
each Memory Program
1
Press the
Check
button to enter Check mode.
The display will be cleared.
2
By using
Number
buttons, enter the Memory Program number
from 1 to 20. For example, press “5“ for Memory Program 5, which
you set as HI Power Level I stage cooking with a time of 6 minutes
and 30 seconds.
3
After one second, the display will clear automatically.
If you want to check other Memory Programs, just enter the
Memory Program numbers.
4
Press the
Stop/Clear
button to exit the Check mode.
Reading each Memory Program’s Cycle Counter
1
Press the
Check
button.
The display will be cleared.
2
Press the
Start
button, then any
Number
button, from 1 to 20. The
number of cycles for that particular Memory Program will be
displayed. The cycle count is displayed in units of 10. For example,
if Memory Program 5 has been used 100 times, the display will
show “10”.
As the display uses units of 10, the cycle counts are approximate. The
cycle count displayed increases every ten cycles. For example, if the
cycle count were 90-99, “9” would be displayed, The “9” would change to
“10” on the 100th cycle. The cycle counter function has a limit of 99,990
cycles. Once that number is exceeded, the cycle counter will
automatically clear and start again from “0”.
3
After one second, the display will clear automatically. If you want to
check the cycle count of other Memory Programs, just enter the
Memory Program numbers.
4
Press the
Stop/Clear
button to exit the Checking mode.
sanyo.fm Page 11 Thursday, January 6, 2005 5:52 PM
