Part
Figure
Description
Assy Sump
- Lower part
Preparation:
Disassemble the Assy-baskets, Case-gear, Assy-
duct, Assy rotor-power duct and holder-fine filter.
Disassemble the Cover base, Case-gear and Shaft-
rod adjuster foot.
- Refer the each disassembly section.
1. Remove the parts which are connected with Assy
sump.
- connectors, drain pump, screws.
2. Remove the four (4) screws.
3. Pull out the Assy sump using your hands toward the
outside carefully.
Caution
Make sure to remove remaining water in the
dishwasher. If not, water will spill on to the floor.
※
Reassembly is in the reverse order of the removal.
4. Remove the wash pump.
●
●
Disassembly and Reassembly _ 17
All manuals and user guides at all-guides.com
