Troubleshooting_41
PROBLEM
POSSIBLE CAUSE
SOLUTION
Leaves a yellow or brown film on
the inside of the dishwasher.
This is caused by coffee and tea
soils.
Remove the soils using a spot cleaner.
Does not dry dishes well.
There is no rinse aid in the
dispenser.
Check the dispenser and add the rinse aid.
Use a liquid type rinse aid.
The temperature of the water is low
when the dishwasher is running.
Connect the water supply line to a hot water supply.
Use rinse aid with the Sanitize option.
Too many dishes have been
loaded.
Proper loading of items can affect drying.
Load your dishes as recommended.
Glasses and cups with concave
bottoms hold water. This water
may spill onto other items when
unloading.
After finishing the cycle, empty the lower rack first and then the upper rack.
This will prevent water dripping from the upper rack onto the dishes in the lower rack.
Has a bad odor.
Water was left over from an
incomplete cycle.
Insert detergent without loading dishes, and run the Normal cycle to clean the dishwasher.
The Drain Hose is obstructed.
Contact a qualified service technician to remove any obstruction from the drain hose.
The dishwasher is not used daily
or soiled dishes are left in unit too
long.
With the dishwasher empty and no detergent, place a glass with 8 ounces of vinegar upright
into the lower rack, and then run a Normal cycle.
Is too noisy.
Sound is generated when the
dispenser cover is open and the
drain pump is operating in an early
stage.
This is normal operation.
The dishwasher is not level.
Ensure the dishwasher is level.
Foreign material (a screw, a plastic
piece) is in the pump chamber.
Contact a qualified service technician to remove foreign material from the pump chamber.
There is a ‘chopping’ sound
because a nozzle is bumping
against the dishes.
Rearrange the dishes.
All manuals and user guides at all-guides.com
