14 _ Disassembly and Reassembly
Part Name
Figure
Description
Door Reversal
9.
Remove the single screw from the back of the door
hinge.
This is the screw that supports the door against
the frame so you can unscrew or screw in
the hinge without needing to support the door
yourself.
10.
Insert the screw you just removed into the other
screw hole on the back of the door hinge, and then
tighten.
11.
Place the door on the other side, and then reattach
it to the dryer.
Insert the head of the screw on the back of
the hinge into the hole above the cut out in the
frame, and then slide the door hinge down until
it stops. Make sure the protrusion on the back
of the hinge is pressed into the cut out before
you tighten the hinge screws.
12.
Push the lever holder into the cut out on the other
side of the door opening. Insert screws, and then
tighten as shown.
13.
Re-attach the remaining screws to the remaining
holes above and below the lever holder, and then
tighten.
