SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 261 of 287
Updated I&M
May 2002
MMC: 752
Cadence Auto Record
DESCRIPTION:
This MMC is only used for the Cadence and Cadence Lite Plug in Voice Mail Cards.
Specific keysets in the phone system can be assigned to automatically record conversations. When this
option is set, all incoming, all outgoing, or all calls (incoming or outgoing) can be recorded.
When this option is selected a specific port can be assigned for each station set to automatic conversation
recording or the effectiveness of this feature cannot be guaranteed.
In this MMC you can assign:
1. Which keysets use this feature. – Station number
2. What mailbox the conversation are recorded in. – Mailbox number
3. What type of conversations are recorded, in, out or both. – I, O or B
4. What port is dedicated to the station. – Voice mail port number
A maximum of 8 stations can access this feature in the DCS.
The same port cannot be assigned to more than one station. Attempts to do this will result in an error
message.
When a Voice Mail port is assigned using MMC 752, it is automatically removed from the Voice Mail group
(529 for Cadence; 519 for Cadence Lite) defined in MMC 601.
WARNING: Before using this feature make sure that you are not violating any state or federal laws. Some
states require that the recorded party be notified. SAMSUNG is not responsible for any illegal use of this
feature.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used to delete an entry
ACTION
DISPLAY
1.
Press TRSF 752
Display shows
AUTO RECORD
STN:NONE MB:NONE
2.
Dial station number
OR
Press UP or DOWN to scroll the number.
Press RIGHT soft key to move cursor
AUTO RECORD
STN:201 MB:NONE
