SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 21 of 280
DCS & DX I&M
August 2001
MMC 107:
Key Extender
DESCRIPTION:
Use this program to view the programmable keys assigned to keyset station. In addition it allows the system
administrator to assign key extenders to some keys making a general access feature key more specific. The
feature keys that can have extenders are listed below.
FEATURE KEY EXTENDER
BOSS Boss and Secretary (1-4)
DIR
Directory dial by name type (1-3)
DP
Direct Pick Up (extension or station group number)
DS
Direct Station Select (station number)
FWRD Call Forward (0-5)
GPIK
Group Pick Up (01-20)
IG
In/Out group (Station Group Number)
MMP
Meet Me Page (0-9, *)
PAGE Page (0-9, *)
SG
Station Group (500-529)
SPD
Speed Dial (00-49, 500-999)
SP
UCD Supervisor (UCD Group Number)
PSM
Programmed Station Message (01-20)
VT
VM transfer (VM/AA Group Number)
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ACTION
DISPLAY
1.
Press TRSF 107
[201] KEY EXTEND
Display shows first station
01 : CALL1
→
2.
Dial station number (eg., 205)
[205] KEY EXTEND
OR
01 : CALL1
→
Use UP or DOWN to scroll through
station numbers and press RIGHT
soft key to move the cursor
3.
Enter key number (eg., 18)
[205] KEY EXTEND
OR
18 : DS 207
→
DS_
Use UP and DOWN to scroll through
keys and use RIGHT soft key to
move the cursor
OR
Press the key to be programmed
Dial extender according to above table
System will return to this step
If no more entries, press LEFT soft
key to return to step 2
