Samsung DCS-816, Руководство по программированию

Страница: 107 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 410 (Page 1 of 2)
MMC: 410
ASSIGN DISA TRUNK
DESCRIPTION:
Allows the system the ability to have Direct Inward System Access (DISA).
Because there is a possibility that unauthorised calls will be made via this feature,
several safeguards have been added. The end user must be informed of these to
prevent unnecessary service calls. DISA can lock out when a predetermined
number of invalid consecutive calls are attempted. Callers will then receive error
tone until the programmable timer has expired. The
[
key may be used to initiate
new dial tone while in a station–to–station call. The # key may be used to
terminate the DISA call and disconnect the central office line. Only one central
office call will be allowed per DISA call but multiple intercom calls are possible. A
central office call requires a passcode, but a station call does not.
NOTE
In order to use DISA the caller must first dial a valid trunk number, followed by a four-digit passcode.
This passcode is defined in MMC 101. DISA users MUST change this passcode as the default
number cannot be used.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL (trunks)
FEATURE KEYS
0 NORMAL No DISA service
1 DAY In day mode DISA is available
2 NIGHT In night mode DISA is available
3 BOTH In both day and night mode DISA is available
ACTION DISPLAY
1. Press TRSF 410
Display shows
[701] DISA LINE
NORMAL
2. Dial trunk number ( e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
OR
Press ANS/RLS key to select all trunks
[704] DISA LINE
NORMAL
[ALL] DISA LINE
?
3. Dial an option (0–3) from above table (e.g. 2)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to return to step 2
[704] DISA LINE
NIGHT