Samsung DCS-816, Руководство по программированию

Страница: 303 / 313

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 8
3.9 PROGRAM PERSONAL SPEED DIAL NUMBERS FOR OTHER
STATIONS
Individual station users can program their own numbers, but in cases where this is not
practical, or for single line telephone users, this program allows a system administrator to
view or change any station's speed dial numbers. The station speed dial codes are 00-49.
Each station begins with 10 numbers (00-09) and can be assigned more in blocks of 10
(up to a maximum of 50 numbers).
Each speed dial number consists of a line access code and the telephone number to be
dialled. The access code can be any line group, individual line, station group or individual
extension. The speed dial number can be up to 32 characters long including
# , FLASH
and PAUSE .
NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.
When you are entering a speed dial number, there are some special keys that you will
need to use. These are the last 6 programmable keys of the righthand row known as
A,
B, C, D, E and F and are defined below.
PROGRAM KEYS
UP & DOWN Selects a station.
KEYPAD Used to enter number.
HOLD Press to clear entry.
A Does not have a function.
B Inserts a FLASH.
C Inserts a PAUSE.
D Changes the dialling type from pulse to tone.
E Hides and displays digits.
Open customer programming and follow the instructions below.
OPERATION
1.
Press TRSF 105 [201] SPEED DIAL
00 :
2.
Dial the station number (e.g., 205 )
OR press UP or DOWN to select the station and
[205] SPEED DIAL
00 :
press the right soft key to move the cursor
OR press the left soft key to go to step 4
3. If the selected station has no speed dial bins, this
display will be shown and a new station may be
[205] SPEED DIAL
SPDBLK NOT EXIST
selected