Samsung DCS-816 Скачать руководство пользователя страница 206 | Manualshive

Страница: 206 / 313

Samsung DCS-816 Скачать руководство пользователя страница 206

SAMSUNG

Programming

DCS-816

February, 1999

MMC 726 (Page 1 of 4)

MMC: 726

VM/AA OPTIONS

DESCRIPTION:

Provides a flexible means of setting in–band signalling for voice mail or auto
attendant parameters. There are eight main options for programming and
several sub–options to customise the application. Simple YES/NO, numeric
and alpha characters are required for setting VM/AA.

The following options may be selected for VM/AA operation:

0. EXT FOR DN1

DTMF information for the station that called the
VM/AA port station that is forwarded to VM/AA
port.

1. TRK FOR DN1

DTMF information for the trunk that called the
VM/AA port.

2. EXT FOR DN2

DTMF information for the station that originated
the call to a station that is forwarded to a VM/AA
port.

3. TRK FOR DN2

DTMF information for the trunk that called a
station forwarded to a VM/AA port.

4. SEPARATOR

In cases where DN2 is used, this specific digit is
sent between the DN1 and the DN2 information.
Both DN1 and DN2 must be set to YES for
SEPARATOR to be sent.

5. DISCONNECT SIGNAL This signal is sent when the calling station or C.O.

line hangs up.

6. CALL TYPE ID

Under this VM/AA option are several customising
applications:

0

. DIRECT CALL

A call originating directly from another station in
the system.

1

. ALL FWD CALL

This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
ALL set.

2

. BSY FWD CALL

This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
BUSY set.

3

. NOA FWD CALL

This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
NO ANSWER set.

«
...
204
205
206
207
208
...
»

Содержание DCS-816


























































































































































































































































































































Отзывы:

Нет отзывов