E-
14
Connecting the Connection Cord
The indoor unit is powered from the outdoor unit via the connection cord.
Remove the screw on the electrical component box and remove the cover
plate.
1
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
2
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
3
Reassemble the electrical component box cover, carefully tightening the
screw.
4
Wiring Diagram
Note :
1. Connect the Connection Cord as seen in picture , and the torque of screw is 40~70kgf•cm .
2. The Split Type Air Conditioner CH
EAM(1)C (CH
EAM(1)C/ UH
AM(1)C) can be connected
only to a supply with system impedance no more than 0.177Ω. In case necessary, please con-
sult your supply authority for system impedance information.
CH105EAMC
CH140/105EAMC
CH052/070EAMC
CH070EAM1C
CH094EAMC
UH105EAMC
UH140/105GAMC
UH052/070EAMC
UH070EAM1C
UH094EAM1C