English - 14
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the
page 42.
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
Press the
START/+30s
button and set the time to 4 or
5 minutes, by pressing the
START/+30s
button the appropriate
number of times.
Result:
The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
SETTING THE TIME
When power is supplied, “88:88” and then “12:00” is automatically displayed on the
display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
When you rst install your microwave oven
After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1.
Press the
Clock
button.
2.
Turn the
Knob Dial
to set time display type. (12H or 24H)
3.
Press the
Select
button
to complete the setup.
4.
Turn the
Knob Dial
to set the hour.
5.
Press the
Select
button
.
6.
Turn the
Knob Dial
to set the minute.
7.
When the right time is displayed, press the
Select
button
to
start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
CE107MNSTR-BWT_DE68-04260D-00_EN.indd 14
2014-04-24 5:05:27
