16
Installation Procedure
English
Installation Pr
oc
edur
e
Step 13 Setting an indoor unit address
and installation option
Set the indoor unit address and installation option with
remote control option. Set the each option separately
since you cannot set the ADDRESS setting and indoor unit
installation setting option at the same time. You need to set
twice when setting indoor unit address and installation option.
Option setting procedure
Power
Mode
Fan speed
Air flow direction
(Left and right)
Options
SET
Air flow direction
(Up and down)
Temperature
Timer
Wind-Free
Direction
1
Remove batteries from the remote control.
2
Insert batteries and enter the option setting mode while
pressing (High Temp button) and (Low Temp button).
3
Check if you have entered the option setting status.
4
After entering the option setting status, select the option.
CAUTION
• Option setting is available from SEG1 to SEG24
• SEG1, SEG7, SEG13, SEG19 are not set as page option.
• Set the SEG2~SEG6, SEG8~SEG12 as ON status and
SEG14~18, SEG20~24 as OFF status.
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
0
X
X
X
X
X
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
1
X
X
X
X
X
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
2
X
X
X
X
X
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
3
X
X
X
X
X
On (SEG1 ~ 12)
Off (SEG13 ~ 24)
DB68-08953A-00_IM_DVM QMD_EU_EN_.indd 16
2020-02-10 오후 4:23:08
