6
A
Selecting the installation location
Indoor Unit
This unit has to be installed as floor type only.
There must be no obstacles near the air inlet and outlet.
Select a convenient location that permits the air to reach every corner of the area to be cooled.
Pre-plan for easy and short routing of the refrigerant tubing and wiring to th outdoor unit.
There should be no flammable gas, alkaline, substances present in the air.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
Do not install the unit where it will be exposed to direct sunlight.
Space requirements for installation & service
1000mm or mor
e
300mm or mor
e
300mm or mor
e
The units must be installed according to distances declared, in order to permit
accessibility from each side, either to guarantee correct operation of
maintenance or repairing products.
The unit’s parts must be reachable and removable completely under safety
condition (for people or things).
This model can be installed with no side space. But it is recommended installing
like above.
