126
Note:
Speaking clearly, say the command that you want to use. If, after a few seconds, the device has not
recognized a command, it prompts you to repeat the command. If, after a few more seconds, it still
has not recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and voice-activates all
the names stored there. When you have add or change contacts, VoiceSignal
automatically reloads and voice-activates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call before you can use
VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has correctly recognized a
name or number. In this case, it can display a list of up to three possible choices, and
prompt you to confirm the correct one.
You can change the way that VoiceSignal uses choice lists with name dialing, digit
dialing, and contacts. For each feature, you can choose to always see a choice list
(even if there is only one choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal displays a choice list
only when it is not confident it has correctly recognized the name or number.
To change the way VoiceSignal uses choice lists:
1.
In standby mode, press the
MENU
key (
), then press
(for
Tools
),
(for
Voice Service
),
(for
Voice Settings
), and
for
Choice
Lists
the following options appear in the display:
• Automatic
—VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
• Always On
—VoiceSignal always displays a choice list, even when there is only
one choice.
• Always Off
—VoiceSignal never displays a choice list.
Use the navigation keys to highlight the Choice List behavior you prefer,
then press the
key to accept the new setting.
pqrs
abc
