28
Using Voice Dial
Use the
Voice Dial
command to dial any number stored in your Contacts list by
saying the name of the contact (Name Dialing). You can also use Voice Dial to dial
any valid telephone number, even numbers not stored in your contact list, by
speaking the individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press the
key.
“
Say a Command
” appears in the display and is pronounced through the
earpiece.
2.
Say, “
Call
”.
You are prompted to “
Say the name or #
”.
3.
Speak clearly and say the name of a person in your Contacts list, first name
followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “
Did you say?
” followed by the first
name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next name, or use the
keypad to select the correct name from the list. (See See
“Choice Lists”
on
page 126, for more information.)
•
Press the
Repeat
(right) soft key (
) to say the name again.
•
Press the
Settings
(left) soft key (
), then press the
Exit
(right) soft key
(
) to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is, Home,
Work, Mobile, and so on), Voice Dial displays the possible choices and
prompts you with “
Which number?
”
5.
Say one of the following number types:
•
“
Home
”
•
“
Work
”
