Samson TROVIS SAFE 3730-6, Монтаж и эксплуатация

Страница: 114 / 184

114 EB 8384-6S EN
Operating the positioner
Tuning the input filter:
1. Turn until Code 6 appears.
2. Press , the code number 6 blinks.
3. Turn until
KP appears.
Î
Press INIT key.
During the tuning, the valve moves through
its whole range and the input filter is recali -
brated.
Tuning the input filter
Default: MAX
7.7 Zero calibration
In case of inconsistencies in the closed position of the valve, e.g. with soft-seated plugs, it
might be necessary to recalibrate zero.
Risk of injury due to the actuator stem extending or retracting.
Do not touch or block the actuator stem.
The process is disturbed by the movement of the actuator stem.
Do not perform zero calibration while the process is running. First isolate the plant by closing
the shut-off valves.
The positioner must be connected to the supply air to perform the zero calibration.
A zero calibration is not possible if there is zero point shift of more than 5 %. In this case,
Code 54 is activated. The positioner must be re-initialized.
Enable configuration:
Configuration is locked again if no settings are entered within 120 s.
WARNING !
NOTICE !