Samson TROVIS SAFE 3730-6, Монтаж и эксплуатация, Страница: 143 / 184

EB 8384-6S EN 143
Annex
Code
no.
Parameter – Readings/
values [default setting]
Description
36* Reset
(continued)
DAG: Reset diagnostics assessment
−
Parameter settings, reference values and logs remain
unchanged.
−
The positioner does not need to be re-initialized.
DS: Resets positioner to default settings.
−
Resets parameters to their default settings.
−
Resets diagnostics assessment.
−
Information parameters (read only) are deleted.
−
Re-initialize positioner.
37 Options
Read only
Indicates which option (terminals 31 and 32, Fig 17) is installed.
No : No option installed
POS : Analog position transmitter
dI : Binary input
LS : Leakage sensor
XI : 4 to 20 mA x input
When the binary input is used, DI and HIGH or LOW status are
displayed in alternating sequence.
When the leakage sensor is used, LS and the detected sound level
in dB are displayed in alternating sequence.
38* Inductive limit switch
[No], YES, ESC
Indicates whether the inductive limit switch option is installed or
not.
39 Set point deviation e info
Read only
Difference of the target position (e = w – x)
40 Min. transit time OPEN
Read only
Minimum opening time determined during initialization
41 Min. transit time CLOSED
Read only
Minimum closing time determined during initialization
42 Set point
Read only
Set point w used in automatic mode
4 to 20 mA correspond to 0 to 100 %
43 Firmware version
Read only
Device type and current firmware version (displayed in alternating
sequence)