Samson SAM HOME, Монтаж и эксплуатация

Страница: 6 / 82

1-2 EB 5660 EN
Safety instructions and measures
Warning against residual hazards
To avoid personal injury or property damage, operators and operating personnel must pre-
vent hazards that could be caused by the device by taking appropriate precautions. Plant
operators and operating personnel must observe the hazard statements, warnings and cau-
tion notes in these mounting and operating instructions.
Responsibilities of the operator
Operators are responsible for proper use and compliance with the safety regulations.
Operators are obliged to provide these mounting and operating instructions to the operating
personnel and to instruct them in proper operation. Furthermore, operators must ensure that
operating personnel or third parties are not exposed to any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warnings and caution notes. Furthermore, operating
personnel must be familiar with the applicable health, safety and accident prevention regula-
tions and comply with them.
Referenced standards, directives and regulations
Devices with a CE marking fulfill the requirements of the Directives 2014/30/EU, 2014/35/
EU and 2011/65/EU. This declaration of conformity is included in the 'Certificates' section.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for connected components, e.g. heating controllers
of the TROVIS 5500 Automation System
− Operating instructions for SAMSON's SAM DISTRICT ENERGY web portal
u
EB 6901