![background image](http://html1.mh-extra.com/html/samson/media-6/media-6_mounting-and-operating-instructions_3794617028.webp)
Transfer data from the memory pen to
Media 6, "read only" status
4
Deactivate write protection by setting
switch
4
to position
OFF
.
4
Plug memory pen into serial interface.
MEMRD
is indicated at the top of the display.
4
Press
key to start reading data.
4
Display shows
RUN
. Data have been
saved to Media 6 when
DONE
is dis-
played. Memory pen can now be re-
moved.
4
Reactivate write protection by setting
switch
4
to position
ON
.
Transfer data from Media 6 to the memory
pen, "write only" status
4
Plug memory pen into serial interface.
MEMWR
is indicated at the top of the display.
4
Press
key to start writing.
4
Press
key. Display shows
RUN
. Data
have been saved to the memory pen when
DONE
is displayed. Memory pen can now
be removed.
7.2
7.2 Communication using a PC
Media 6 can also be operated using a PC/
notebook PC connected to the serial interface
and the TROVIS-VIEW Configuration and
Operator Interface.
For details refer to Mounting and Operating
Instructions
EB 9527-2 EN
.
Warning!
The serial interface is not approved for use in
hazardous areas
. Do
not connect
a PC/note-
book PC to the serial interface inside hazard-
ous areas.
When exchanging data in
hazardous areas
,
only
the intrinsically safe SAMSON memory
pen may be used for connection to the serial
interface.
28
EB 9527-3 EN
Communication using the memory pen
Содержание Media 6
